Acrylic Sealant

Description

SAVE- IT 402 is a single pack, ready-to use, multi-purpose sealant. It is a compound based on aqueous acrylic polymers. It is available in grey and white colour. Any other colours are available on request.

Primary Uses

·   For filling gaps and joints internally subject to limited amount of movement, e.g. around concrete and doors, window, fixtures and fittings.

·   It is found to be excellent as joint fillers between different building materials.

Features

·   High solids, Low shrinkage.

·   Excellent adhesion to most building material

·   No mixing, ready-to-use directly from the cartridge / container

·   Non-sagging, suitable for vertical and horizontal applications.

·   Highly UV resistant

·   Non-suitable on soft plastics, bare metals, bitumen and under water joints.

Properties

 Colour                                     :           White & Grey

Tack Free Time                        :           3 Hours

Cure Time                                :           24 Hours

Application

 The surface must be clean, free from dust, oil, grease and other contaminants. After thorough cleaning apply SAVE- IT 402 straight from the container. Finishing may be carried out by using soap water.

Technical Data

Movement                               :           10-15% average joint width

Minimum joint width                :           4 mm

Maximum joint width                :           15 mm

Width : depth Ratio                  :           Joint up to 10 mm wide (1:1)

                                                            Joint between 10 mm to 20 mm wide (2:1)

Density                                     :           1.5+/-0.1 kg /ltr at 27ºC

Application Temperature         :           Between 5ºC and 45ºC

Shelf Life                                 :           One year if kept in unopened container.

Packaging

SAVE- IT 402 is available in 50 Kg packs.

Storage

Store in cool, dry condition.

Note

Field service, where provided, does not constitute supervisory responsibility. For additional information contact your local SAVE-IT representative. SAVE-IT reserves the right to have the true cause of any difficulty determined by accepted test methods.

Disclaimer

Whilst any information contained herein is true, accurate and represents our best knowledge and experience, no warranty is given or implied with any recommendations made by us, our representatives or distributors as the conditions of use and the competence of any labour involved in the application are beyond our control.